Fibre Broadband

How to set up a D-Link 825 Fibre Router for a DHCP connection

What is DHCP? DHCP means Dynamic Host Configuration Protocol and is a network protocol that connects by obtaining an IP address and then connects automatically.

Follow the steps below to set up the newer D-Link 825 router for DHCP:

  • Open your internet browser. Enter the router’s IP address: 192.168.0.1 into the address bar and press enter.

Tip. The router's IP address can be found under the router.

  • Log in to the router.

Username: ‘admin’.

Password: Enter the password displayed on the sticker under the router or the password if one has been created for you.

  • Click ‘Login’.

  • If it is your first time logging into the router you will be required to go through the wizard to configure the router.
  • Click ‘Start’ to start the ‘Internet Connection Setup Wizard’.
  • Confirm if your language is English and click ‘Yes’ if it is.

  • Click ‘Continue’ to continue with the set-up wizard.

  • Under Connection Method, from the drop-down menu select ‘Wired Connection’

  • Under Work Mode, from the drop-down menu select ‘Router’.
  • Click ‘Next’.

  • Under Connection Type, from the drop-down menu select ‘Dynamic IPv4’
  • Click ‘Next’.

  • You will now need to configure the 2.4Ghz wireless network. Enter a Network Name and secure Password of your choice.
  • Click ‘Next’.

  • Then you will need to configure the 5Ghz wireless network. Enter the Network Name and a secure password of your choice and click ‘Next’.

  • Do not enable IPTV, click ‘Next’.
  • Do not enable VoIP, click ‘Next’.
  • You will be required to set up a new password for the router if it is the first time logging in and click ‘Next’.

  • Please note the summary of your settings or select ‘Save Configuration File’ to download the configuration backup file.
  • Click ‘Apply’ to save these settings.

  • Once done click ‘Finish’ to complete the router set up.

How to create a strong password: It is important to create a strong and secure password. Use a minimum of 10 characters. Include uppercase, lowercase, numbers and use at least one special character (eg: =~_{} @^&>*) in the password. Do not include a username or your name in the password.

Follow the steps below to set up the older D-Link 825 router for DHCP:

  • Log into the router. Open your internet browser. Enter the router’s IP address: 192.168.0.1 into the address bar and press enter.

  • Enter the routers username and password.
  • Click ‘Login’.

  • On the home page of the router select the ‘SETUP’ tab from the top menu bar.
  • Ensure you are on ‘INTERNET’ from the menu options on the left-hand side.
  • Select ‘Internet Connection Setup Wizard’.

  • A ‘Welcome to the Set Up Wizard’ screen will appear, click ‘Next’.

  • Step 1 will request you to enter a new administrator password to access the router in the future. Enter your new password and click ‘Next’.

  • Step 2 will require you to select the correct time zone of your location. From the drop-down menu select the time zone. South Africa is GMT+2. Then click ‘Next’.

  • Step 3 will require you to select the correct configuration for your internet connection. Select DHCP Connection and click ‘Next’.

  • Click ‘Next’.

  • The Setup is now complete, Select ‘Connect’ to save the settings.

  • Your settings will be saved and are now all set up and you are ready for Pure Internet Joy.

If you do not connect immediately please reboot the router.

Still have questions? Contact us on any of the platforms below